PE Gas Pipes
EN 1555-2 compliant gas distribution systems.
DN 20–630 | SDR 17.6–11 | Pressure up to 10 bar | Application: Gas distribution networks
Installation Principles
Installation must follow applicable installation standards and engineering practice. Key considerations:
Proper
bedding preparation
Controlled
compaction zones
Correct
fusion joint assembly (butt or electrofusion welding)
Compliance
with pressure rating and burial depth requirements relative to PN class
Performance Characteristics
Strength
Long-term hydrostatic strength per MRS rating (PE80/PE100)
resistance
Impact resistance performance
tightness
Joint tightness under defined testing conditions
tolerance
Dimensional tolerance compliance
behavior
Long-term behavior under internal pressure and soil load
System Overview
STRONIX PE gas pipes are designed for combustible gas distribution networks where pressure resistance, fusion joint integrity and long-term dimensional stability are critical. The system is engineered in accordance with EN 1555-2 requirements and supported by documented Factory Production Control.
Technical Characteristics
-
Standard: EN 1555-2
-
Construction: Solid wall
-
Material: Polyethylene (PE 80 / PE 100)
-
Nominal Diameters: DN 20–630
-
Pressure Class (SDR): SDR 17.6/17/11 (up to 10 bar)
-
Joint Type: Butt or electrofusion welding
-
Color: Black with yellow longitudinal stripes
-
Marking: Batch traceability + standard reference
Traceability & Quality
Each STRONIX pipe is marked with production batch and standard reference. Internal production controls and periodic testing ensure compliance with declared properties.